- ページ 7

バスルーム設備 Kohler ARICA K-705230のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Kohler ARICA K-705230 12 ページ。 Neo-angle shower enclosures

J. FINAL ADJUSTMENTS

NOTE: The bottom of the door frame and return

panels should not be more than 1/8" out of

level over the entire width of the door and

panels. Shim if necessary.

Adjust the door frame and return panels for square, level

and plumb.

Make adjustments to the return panels by shifting panels

until level and square.

Use a level to insure that the door is plumb and square.

CAUTION: Risk of product damage. Do not

overtighten adjustment screws.

After the door frame is level, adjust the middle adjustment

screws, being careful not to overtighten as this may cause

the frame to bow.

K. SECURE RETURN PANELS TO WALL

JAMBS

CAUTION: Risk of injury. Wear Safety Glasses.

From inside the shower enclosure, drill through the

internal panel frame and wall jamb extrusions (top and

bottom of each side), using a 1/8" drill bit.

Secure return panels to each wall using four #8-18 x 3/8"

panhead screws.

L. SECURE EXPANDER JAMB BRACKETS

After all adjustments have been made, secure the

expander jamb brackets on each side of the pivot door at

the top of the enclosure.

Insert two #8-18 x 3/4" panhead screws through the

bracket slots and into the corner post screwports and

secure. Repeat for other bracket.

Kohler Co., Kohler, WI U.S.A.

Top View

Expander Jamb

Bracket

Wall Jamb

#8-18 x 3/8"

Panhead

Screw

Panel Frame

#8-18 x 3/4"

Panhead

Screw

116896-2-