- ページ 8

バスルーム設備 Kohler BELAY K-156T-LCPのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Kohler BELAY K-156T-LCP 23 ページ。

ページを印刷する

1. Installation Instructions

Raise the bath by positioning 2 pieces of wood

blocks under the metal frame and ensure there is

enough space for the drain. (For K-156T-LCP/RCP)

Install the drain to the bath according to the

installation instructions included in the box

containing the product.

Carefully push the bath into the alcove confirm that

the drain connections line up with the drain, and

then remove the wood blocks.

4. Install Gap Panel Supports

NOTICE: Complete these steps only if you will use the

provided gap panel to fill a gap between the bath rim

and the walls.

Draw a line on the back and drain-end alcove walls,

even with the top of the bath rim.

Measure the thickness of the gap panel, then

measure and mark this distance underneath the first

set of lines drawn on the walls. You will use this

bottom set of lines to position 2 support pieces.

Cut two straight pieces of 2 lumber, one to fit along

the back wall and another along the drain-end wall.

Or use bracket panel K-23772T (the options)

mounting on the wall.

Using a fastening method appropriate for the wall

and framing materials, secure the 2X4's firmly or

bracket panel K-23772T in place at the bottom set of

pencil lines.

Carpenter's Square

1397340-T01-A

(

Wood Blocks

(

)

K-23772T(

Lumber

First Line

Gap Panel

Thickness

Second Line

-8-

K-156T-LCP/RCP)

(For K-156T-LCP/RCP)

(

K-156T-LCP/RCP)

)

Bracket Panel(K-23772T-*)

(K-23772T-*)

First Line

Second Line

K-23772T

Gap Panel

Thickness