- ページ 4
バスルーム設備 Kohler C3-520のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Kohler C3-520 17 ページ。 Smart seat
Kohler C3-520 にも: インストレーション・マニュアル (17 ページ), ホームオーナーズマニュアル (41 ページ), インストレーション・マニュアル (33 ページ)
![Kohler C3-520 インストレーション・マニュアル](/uploads/products/server2/2592047/2592047.jpg)
1. Toilet roughing-in requirements and installation tips
2
3
5
1. Distance between installation holes: 136 - 210mm.
2. Distance between installation holes and tank front rim: >20mm.
3. Distance between installation holes and bowl inner rim: <70mm.
4. Distance between installation holes and tank top rim: 460 - 490mm.
5. Bowl inner diameter: 370 - 390mm.
6. The distance between the seat and the plug should be maximum 1 meter.
2. Install an Electrical Outlet
WARNING: Risk of electric shock, fire, or personal injury.
This product must be grounded. Connect only to a dedicated
110V~, 50Hz/60Hz, 15A circuit protected by Ground-Fault Circuit-
Interrupter (GFCI) or Earth-Leakage Circuit-Breaker (ELCB).
It is recommended to use water-resistant socket. Do not use an
extension cord with the product.
NOTE: Follow local codes when determining the electrical outlet location.
Route the electrical and install to a 110V~, 50Hz/60Hz, 15A GFCI- or ELCB-
protected receptacle.
3. Preparation
Turn off the water supply to the toilet.
Flush the toilet to relieve any pressure from the water supply hoses.
Place a container under the inlet valve to catch any residual water.
Disconnect the water supply hose from the inlet valve.
Remove the existing toilet seat.
1350315-TW01-A
1
4
4
110V AC
Kohler Co.