- ページ 5

バスルーム設備 Kohler Caxton K-2216のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Kohler Caxton K-2216 20 ページ。 Countertop and undercounter lavatories
Kohler Caxton K-2216 にも：ホームオーナーズマニュアル (24 ページ)

ページを印刷する

Lavatory

Sealant

Route or shim

as required to

level tile.

Water Resistant Underlayment or

Backing Material 3/4" (1.9 cm)

Minimum

Tile-In Installation

2. Install the Lavatory

Tile-In Installation

Cut out the opening by carefully following the pencil line traced

from the template.

Drill the faucet holes according to the faucet installation

instructions.

Measure and compare the thickness of the lavatory rim and tile.

The lavatory rim thickness is 1/2" (1.3 cm) plus or minus 1/16" (2

mm). Because of the varying thickness of the tile and lavatory, or

if adhesive or mortar bed installation is used, make allowances to

shim the lavatory, or route the underlayment as required.

NOTE: The lavatory is designed to be installed ﬂush or slightly

lower than the surrounding tile.

Provide shims, or route the underlayment, as needed.

Position the lavatory in the countertop opening. Verify the ﬁt and

position.

Carefully remove the lavatory.

Install the drain to the lavatory according to the drain

manufacturer's instructions.

Apply two beads of sealant to the inside of the pencil line.

NOTE: Apply sealant quickly as it sets within minutes.

Kohler Co.

Tile

Mortar or

Adhesive

1018895-2-B