- ページ 7

バスルーム設備 Kohler K-10586のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Kohler K-10586 48 ページ。 Bidet faucet
Kohler K-10586 にも：ホームオーナーズマニュアル (32 ページ), インストレーション＆ケア・マニュアル (24 ページ)

Stopper

Nut

Body Nut

Rod

Seal

Body

Seal Hole

Apply 3 layers of

Tailpiece

sealant tape and a

small bead of pipe

sealant to threads.

5. Complete Drain Installation-Style A

For regular installations, insert the short end of the rod into the

body seal hole and under the stopper. For vandal-resistant

installations, ﬁt the rod through the hole in the stopper. Secure

with the body nut.

Remove and adjust the stopper so it lifts about 3/8" (1 cm) when

opened. To adjust, loosen the stopper nut and shorten or lengthen

the stopper as needed. Tighten the stopper nut.

Apply three layers of thread tape and a small bead of pipe

sealant to the tailpiece threads.

Thread the tailpiece to the body and tighten securely.

Slide one end of the clip onto the rod. Slide the link onto the rod

with the thumbscrew facing the back of the ﬁxture.

Squeeze the other end of the clip, aligning the hole with the rod.

Move the link to the proper position by squeezing the clip and

sliding it along the rod.

Insert the lift rod into the hole in the faucet and then into the

hole in the link.

Tighten the thumbscrew onto the link so the lift rod knob extends

above the lift rod hole.

Kohler Co.

Faucet

Rod

Clip

Thumb

Screw

Link

1010448-2-F