- ページ 2
バスルーム設備 Kohler K-1246のPDF ラフイン・マニュアルをオンラインで閲覧またはダウンロードできます。Kohler K-1246 4 ページ。 Bath whirlpool
Kohler K-1246 にも： ホームオーナーズマニュアル (32 ページ), インストレーション・マニュアル (48 ページ), ラフイン・マニュアル (4 ページ), インストレーション・マニュアル (44 ページ), インストレーション・マニュアル (48 ページ)
ページを印刷する
1-1/2"
(3.8 cm)
Drop-In Rim Detail
42" (106.7 cm)
Product Information
Drop-in bath whirlpool
Fixture*:
basin area
Bathing
44" (111.8 cm) x
well
31" (78.7 cm)
water depth
To
15" (38.1 cm)
overflow
* Approximate measurements for comparison only.
Pump:
Hp
1-speed
1.25
Included Component:
Cutout template
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
120 V, 15 A, 60 Hz
Locate the outlet behind the whirlpool and within 24" (61 cm)
of the pump.
1013768-1-B
12-5/16" (31.3 cm)
5-3/8" (13.7 cm)
17"
(43.2 cm)
Pump/Control Access
20" (50.8 cm) W x
15" (38.1 cm) H Min
(Typical)
3-1/2"
(8.9 cm)
1-1/2" OD
K-1246
shown
top area
weight
50" (127 cm) x
110 lbs
34" (86.4 cm)
(49.9 kg)
capacity
69 gal (261.2 L)
V
Hz
120
60
113926-7
16-1/16"
(40.8 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
Notes
Install this product according to the installation guide.
Floor support under the whirlpool must provide for a minimum of
1200 lbs (544.3 kg) loading.
If installing a rim-mount faucet, make sure there is no interference
with the drain overflow and circulating system before drilling any
holes. Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck.
Pump must be relocated to custom position at the time of
installation. Provide adequate clearance.
This fixture conforms to ANSI Standard Z124.1. All dimensions are
nominal.
This fixture conforms to CSA B45 and ANSI Standard Z124.1. All
A
dimensions are nominal.
7.5
2
No change in measurements with drain
shown. (K-7161-AF or K-7161M-AF)
Recommended faucet area.
60" (152.4 cm)
1-3/16" (3 cm)
21"
(53.3 cm)
Kohler Co.