ページを印刷する
Install screws through holes in mirrored cabinet as shown in Fig.1, 2
1 2
Note:
DO NOT OVER- TIGHTEN!
Use s
crews ST3.5 35
ST3.5 35
SURFACE MOUNTING THE MIRRORED CABINET ON A WALL
NOTE:
Installing the mirrored cabinet on a wall without the door
attached can make installing easier for one person. Do not
mount the doors until the boxes is in or on the wall.
As shown in Fig 3, drill two 2- 5mm holes
in bottom mounting bar at indent location,
then drill 4- 6mm holes in wall at locations
shown in Fig 3, insert wall anchors.
3
1132363-T01-B
.
Mirrored cabinet flange fits flush against wall
5
4
6
Screws ST3.5 35 & Wall anchor
Top View
Install dome caps over screws
Fig. 2
2
ST3.5 35
Fig. 3
-4-
Stud and wall surface
Drill holes
Drill holes
4- 6mm
4- 6mm
4- 6mm
4- 6mm
Drill holes 2- 5
Drill holes 2- 5
2- 5
2- 5
3
STEP
2
STEP
1