- ページ 23

ドライヤー AEG LAVATHERM 56840LのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AEG LAVATHERM 56840L 28 ページ。

Removing transport safety packaging

CAUTION!

Before use all parts of the transport packaging

must be removed.

1. Open loading door

2. Pull off adhesive strips from inside machine

on top of drum.

3. Remove foil hose and polystyrene pad-

ding from the machine.

Details on mains voltage, type of current and the fuses required should be taken from the

rating plate. The rating plate is fitted near the loading aperture (see "Product description"

chapter).

Connect the machine to an earthed socket, in accordance with current wiring regulations.

WARNING!

The manufacturer declines any responsibility for damage or injury through failure

to comply with the above safety precautions.

Should the appliance power supply cable need to be replaced, this must be carried

out by our Service Centre.

The appliance is supplied with a 13 amp plug fitted. In the event of having to change the

fuse in the plug supplied, a 13 amp ASTA approved BS 1363/A fuse must be used.

Installation