- ページ 25

ドライヤー AEG LAVATHERM 57810のPDF ユーザー情報をオンラインで閲覧またはダウンロードできます。AEG LAVATHERM 57810 32 ページ。 Condensation dryer
AEG LAVATHERM 57810 にも：ユーザー情報 (32 ページ)

Installation and connection instructions

• Before first starting up, all parts of the transport safety equipment

must be removed. The machine may otherwise be damaged.

• Before starting up for the first time, ensure that the nominal voltage

and type of current specified on the machine type plate match the

nominal voltage and type of current at the installation site. The elec-

trical fuses required can also be found on the type plate.

• Always connect the plug into a protection contact socket which has

been installed as specified.

• With permanent connections: A permanent connection may only be

established by an authorised specialist electrician.

• Do not install machine in rooms at risk of frost.

• Ensure that the door of the machine cannot be blocked by interior

doors of the house or the doors of other appliances.

• Do not install on carpets with high piles. Air circulation will be hin-

dered at the ventilation slots.

• Ensure that the machine is not placed on its mains cable.

• Install the machine horizontally.

Caution! Before first starting up,

all parts of the transport safety

equipment must be removed.

1. Open loading door

2. Pull off adhesive strips from inside

machine on top of drum.