- ページ 38

ドライヤー AEG LAVATHERM 59840のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AEG LAVATHERM 59840 48 ページ。 Condenser dryer with heat pump

Installation

Unscrew cover plates E from the

front of the machine, rotate

through 180°, screw on the oppo-

site side.

Unscrew door lock F, push down

slightly and remove from the front

of the machine.

Disconnect cable connector from

door lock F.

10. Press snap-in button G in and

down, press cover down slightly

and remove from front of the ma-

chine.

11. Disconnect cable connector from

cover G.

12. Change door lock F over to the opposite side, insert the cable connector and

screw down the door interlock.

13. On the other side, insert the cable connector in cover G, insert cover and allow

snap-in button to lock into place.

14. Insert loading door and hinges into recesses on the front of the machine and

screw down.

Note regarding contact protection:The machine is only secure for operations

again once all plastic parts have been inserted.

Special accessories

Intermediate installation kit for stacked washer and dryer:

Available from your Service Force Centre or your specialist dealer

These intermediate installation kits can be used to arrange the dryer and an

automatic AEG-Electrolux washing machine (60cm wide, front loading) as a space-

saving washer/dryer stack. The automatic washing machine is at the bottom and

the dryer is at the top.

Version to be supplied:

– with extractable stacker plate 916.018 903

Read carefully the instructions supplied with the kit.