- ページ 22
ドライヤー AEG LAVATHERM T8DEE845RのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AEG LAVATHERM T8DEE845R 32 ページ。 Tumble dryer
AEG LAVATHERM T8DEE845R にも: ユーザーマニュアル (24 ページ)
22
www.aeg.com
Problem
There is no
drum light
Unexpected du-
ration time ap-
pears on the dis-
play.
A programme is
inactive.
The drying cycle
is too short.
Drying cycle too
6)
long
1) If there is an error message on the display (e.g. E51): Turn the tumble dryer off and on. Select a new
programme. Touch the Start/Pause button. If the appliance does not operate contact the service centre
and provide the error code.
2) Follow the programme description — see the PROGRAMMES chapter .
3) See the
CARE AND CLEANING chapter.
4) Only dryers with the Dryness Level option.
5) See the HINTS AND TIPS chapter .
6) Note: After a maximum of 6 hours the drying cycle ends automatically.
11.1 Possible causes of
unsatisfactory drying results:
• The filter is clogged. Clogged filter
makes drying inefficient.
• The airflow slots are clogged.
• The humidity sensor is dirty.
• The drum is dirty.
Possible cause
1)
Defective drum lamp.
The drying duration is calculated
according to load size and damp-
ness.
The water container is full.
The load size is small.
The laundry is too dry.
The filter is clogged.
The load is too large.
The laundry was not spun suffi-
ciently.
Too low or too high room temper-
ature - this is not the appliance
malfunction.
Contact the service centre to re-
place the drum lamp.
This is automated - the appliance
is working correctly.
Drain the water container, push
the Start/Pause button.
Select a time programme. The
time value must be related to the
load. To dry one item or a small
amount of laundry we recommend
short drying times.
Select an appropriate time pro-
gramme or a higher dryness level
extra dry )
(e.g.
Clean the filter.
Do not exceed the maximum load
size.
Spin the laundry well in the wash-
ing machine.
Ensure a room temperature higher
than +5°C and lower than +35°C.
Optimal room temperature to ach-
ieve best drying results is between
18°-25°C.
• Inadequate default dryness level
settings. See chapter
default dryness level
• Room temperature is too low or too
high. Optimal room temperature is
between 18°-25°C.
Remedy
3)
Adjustment of