ページを印刷する
Program
1) For partial loads, the cycle time is shorter and appliance uses less energy.
2) Improper ambient temperature and/or poorly centrifuged laundry can prolong cycle time and increase
the energy consumption.
6. OPTIONS
6.1 +Anti-crease
Extends up to 120 minutes the anti-
crease phase (30 minutes) at the end of
the drying cycle. After drying phase drum
rotates from time to time to prevent
creases. Laundry can be removed during
the anti-crease phase.
6.2 End Signal
The sound is heard at the:
• cycle end
• start and end of crease guard phase
The buzzer option is by default always
on. You can use this option to activate or
deactivate the sound.
6.3 Time Dry
This option is applicable only to the Time
Dry programme. You can set the
programme duration, from a minimum of
10 minutes to a maximum of 2 hours.
The setting of the duration is related to
the quantity of laundry in the appliance.
The cycle lasts as long as
set drying time regardless of
the size of a load and its
dryness.
7. BEFORE FIRST USE
Rear drum locks are
removed automatically when
dryer is activated for the first
time. Possible to hear some
noise.
Spun at / residual humidity
800 rpm / 50%
Drying time
80 min
TIME DRYING RECOMMENDATION
up 10
action of cool air only (no heat‐
min
er).
additional drying to improve dry‐
10 - 40
ness after previous drying cy‐
min
cle.
full drying of the small laundry
> 40
loads up to 4 kg, well spun
min
(>1200 rpm).
6.4 Delay Start
Lets to delay the start of a
drying program from
minimum of 30 minutes to
maximum of 20 hours.
1. Set the drying program and options.
2. Touch Delay Start button again and
again.
Time of delay is on the display (e.g.
if the program has to start after 12
hours.)
3. To activate Delay Start option, touch
the Start/Pause button.
Time to start decreases on the display.
It is highly recommended
to start any programme for
the first time without the
load for a few seconds to
ensure that the rear drum
locks are removed
properly.
ENGLISH
13
Energy
consump‐
1)
2)
tion
0,85 kWh