ページを印刷する
Problem
Incorrect program selection.
The filter is clogged.
Droogtegraad option was set to
The load was too large.
Unsatisfactory
drying result.
The airflow slots are clogged.
There is some dirt on the humidity
sensor in the drum.
The dryness level was not set to
the desired level.
The condenser is clogged.
The filter is not locked into posi‐
The loading
tion.
door does not
Laundry is trapped between the
close
door and the seal.
It is not possible
After a cycle starts it is not possi‐
to change the
ble to change the program or op‐
program or op‐
tion.
tion.
It is not possible
The option you tried to select is not
to select an op‐
available for the selected program.
tion. An acoustic
signal is emit‐
ted.
Unexpected du‐
The drying duration is calculated
ration time ap‐
according to load size and damp‐
pears on the
ness.
display.
The water container is full.
A program is in‐
active.
Possible cause
3)
strijkdroog .
Remedy
Select a suitable program.
2)
Clean the filter.
Change Droogtegraad option to a
higher level.
Do not exceed the maximum load
size.
Clean the airflow slots at the bot‐
tom of the appliance.
Clean the front surface of the
drum.
Adjust the dryness level.
Clean the condenser.
Put the filter in the correct position.
Remove trapped items and close
the door.
Turn the tumble dryer off and on.
Change the program or option as
required.
Turn the tumble dryer off and on.
Change the program or option as
required.
This is automated - the appliance
is working correctly.
Drain the water container, push the
2)
Start/Pauze button.
ENGLISH
23
1)
4)
2)