- ページ 10

バスルーム設備 Kohler Symbio K-1315-HのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Kohler Symbio K-1315-H 32 ページ。 Bath whirlpool

18. Confirm Proper Operation

Fill the Whirlpool

NOTE: Please read these steps carefully before you operate your whirlpool.

- Position the jet nozzles so they face down toward the basin. Turn the jet trim rings fully counterclockwise.

- Fill the whirlpool to a water level at least 2" (5cm) above the top of the highest jet.

NOTE: The water temperature in the whirlpool should not exceed 104_F (40_C).

Operating Sequence

NOTE: A built in heater automatically maintains the water temperature when the whirlpool is running.

- Press the Jets" button to turn on the whirlpool at high speed.

- Adjust each jet for optimum air/water mixture. Turn the trim ring clockwise to reduce the air flow, and

counterclockwise to increase the air flow.

- Press the Jets" button again to run the whirlpool at low speed.

- Press the Jets" button a third time to turn off the whirlpool.

NOTE: A built in timer automatically stops the whirlpool after approximately 20 minutes of operation.

1012312-2-

Press the "Jets"

button to turn on and

off the whirlpool

functions

Turn the jet trim

ring clockwise to

decrease the flow

Turn the jet trim ring

counterclockwise to

increase the flow

Kohler Co.