- ページ 5

バスルーム設備 Kohler Vanity K-5289のPDF インストレーション＆ケア・マニュアルをオンラインで閲覧またはダウンロードできます。Kohler Vanity K-5289 41 ページ。

Finished

Wall

Leveler

2. Secure the Vanity

CAUTION: Risk of property damage. Select 250 lb (113.4

kg) load bearing 5/16" lag bolts with a length to clear

obstacles in the wall and 5/16" washers. Calculate proper lag

bolt length by adding the following: 1-1/2" (38 mm) backing

material + wallboard thickness + back rail thickness.

IMPORTANT! Risk of product damage. Use care when moving the

vanity to avoid impacting, sliding, or side-loading the legs.

With assistance, lift and place the vanity in position against the

ﬁnished wall. Do not drag the vanity into position.

Verify the vanity is level and the back rail is plumb against the

wall. If necessary, turn the leveler(s) to adjust the unit.

Using a 1/4" drill bit, drill pilot holes through the back rail and

the ﬁnished wall. Verify the pilot holes are positioned to ensure

the lag bolts will engage the 2x6 backing material.

Secure the vanity to the wall with two 5/16" lag bolts and

washers (not provided).

Install the Bridge Cabinet (Optional)

Refer to the installation instructions packed with the K-2607

bridge cabinet.

Kohler Co.

Back Rail

Washer

Lag Bolt

Pilot

Hole

1267640-2-A