- ページ 4

バスタブ Kohler Archer K-1125のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Kohler Archer K-1125 21 ページ。 Flanged acrylic bath with integral apron
Kohler Archer K-1125 にも：仕様 (2 ページ), インストレーション＆ケア・マニュアル (29 ページ), インストレーション＆ケア・マニュアル (25 ページ)

Clear spaces

for support

blocks.

3. Secure the Bath to the Subﬂoor

CAUTION: Risk of product damage. Do not support the bath by the rim.

Verify the subﬂoor is level. Shim the bath support blocks as necessary to achieve level.

Secure the bath to the subﬂoor using cement or mortar board (see Option 1 below), OR construction

adhesive (see Option 2 below), OR silicone sealant (see Option 3 below).

Option 1: Secure Using Cement or Mortar Bed

Spread a 2" (5.1 cm) thick layer of cement or mortar on the subﬂoor where the bath will be placed.

This will help secure, level and support the bath.

NOTE: The support blocks must rest directly on the support ﬂoor.

Clear all the material away from the support block locations.

NOTE: Do not use gypsum cement or drywall compound for this application, as they will not provide an

acceptable, durable bond.

Position a piece of plastic drop cloth or similar material over the cement or mortar bed.

With help, carefully lift the bath into place and make sure the support blocks do not rest in the bed

material. Verify that the bath is level and resting on all support blocks.

Insert the drain tailpiece into the trap.

Option 2: Secure Using Construction Adhesive

Apply a generous amount of high-quality construction adhesive to the bottom of the support blocks.

With help, carefully lift the bath into place and verify it is level and resting on all support blocks.

Insert the drain tailpiece into the trap.

1014139-2-D

Spread a 2"

(5.1 cm) layer

of cement or

mortar bed

Apply construction

material.

adhesive to the

support blocks.

Kohler Co.