- ページ 5

バスタブ Kohler K-1113のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Kohler K-1113 25 ページ。 Drop-in acrylic baths
Kohler K-1113 にも：インストレーション＆ケア・マニュアル (29 ページ), インストレーション＆ケア・マニュアル (25 ページ)

Spread a 2" (5.1 cm)

layer of cement or

mortar bed material.

4. Secure the Bath to the Subﬂoor – Models With Bath Base Only

CAUTION: Risk of product damage. Do not support the bath by the rim.

Verify the subﬂoor is level. Shim the bath support blocks as necessary to achieve level.

Secure the bath to the subﬂoor using "Option 1: Secure Using Cement or Mortar Bed" OR "Option 2:

Secure Using Construction Adhesive".

Option 1: Secure Using Cement or Mortar Bed

Spread a 2" (5.1 cm) thick layer of cement or mortar on the subﬂoor where the bath will be placed.

This will help secure, level and support the bath.

NOTE: Do not use gypsum cement or drywall compound for this application, as they will not provide an

acceptable, durable bond.

Position a piece of plastic drop cloth or similar material over the cement or mortar bed.

With help, carefully lift the bath into place.

Verify the bath is level.

Insert the drain tailpiece into the trap.

NOTE: An access panel will simplify future maintenance.

Remove the protective tape from the bath rim.

Apply a continuous bead of silicone sealant around the entire rim of the bath.

Option 2: Secure Using Construction Adhesive

Apply a generous amount of high-quality construction adhesive to the bath base.

With help, carefully lift the bath into place.

Verify the bath is level.

Insert the drain tailpiece into the trap.

NOTE: An access panel will simplify future maintenance.

Remove the protective tape from the bath rim.

Apply a continuous bead of silicone sealant around the entire rim of the bath.

Kohler Co.

Apply

construction

adhesive to

the bath base.

1023730-2-F