- ページ 5

バスタブ Kohler Vintage K-700TのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Kohler Vintage K-700T 12 ページ。 Drop-in or freestanding cast iron bath

C. Install Overflow Elbow

Remove the O-rings and lubricant from the package.

Apply lubricant to the O-rings.

Assemble the O-rings into the grooves of the

overflow elbow.

Apply more lubricant to the O-rings and overflow

elbow.

Insert the overflow elbow into the overflow tube.

Attach the black gasket to the overflow elbow, as

shown.

Apply a ring of plumbers putty or other sealant,

according to the manufacturer

front side of the gasket (putty will be between the

gasket and the bath).

Align the overflow elbow with the overflow hole in

the bath. From inside the bath, tighten the retainer

nut to the overflow elbow.

Tighten all coupling nuts on the tee to secure the

assembly.

Apply thread sealant tape to the tailpiece threads.

Thread the tailpiece onto the tee and tighten

securely.

Make sure the tailpiece on the drain fits properly into

the trap. The tailpiece may need to be cut for proper

fit. 1 "(25mm) to 2"(50mm) of the tailpiece should fit

inside the trap.

(50

)

1023725-T01-A

instructions, to the

(25

)