- ページ 5

トイレ Kohler BRAZN EDGE1PC K-EX24333T-BSZのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Kohler BRAZN EDGE1PC K-EX24333T-BSZ 8 ページ。 Floor standing toilet

Install brackets.

Firmly press the toilet gasket onto the

toilet outlet of plastic trap.

NOTE 1:

Wax ring type toilet gasket

should not be installed at temperatures

less than 21 C.

NOTE 2:

If you are using a toilet

gasket with an integral plastic sleeve,

make sure the gasket is positioned

with the sleeve facing away from the

toilet.

Install plastic to ground and mounted

with 3 set of bolts

(not supplied)

NOTE: Must use the toilet installation

gasket ring (not supplied) to seal the

area where the waste pipe contacts

the construction section to avoid

leakage.

One side of the hose is screwed on the

inlet valve, and pull the other side out

of the ceramic.

Hose and inlet cover fixing show as

below.

Take hose guide apart and slide onto

the supply hose, with the flared end

last. Slide the two inserts into the

flared end of the hose guide. Insert

into toilet wall and tighten nut.

1416649-T01-A

firmly.

Hose Guide

Fig.#6

Plastic Trap Outlet

Toilet Gasket

Fig.#7

Fig.#8

Fig.#9

Fig.#10

-5-

)

(