- ページ 4

トイレ Kohler FAMILY CARE K-23188T-SのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Kohler FAMILY CARE K-23188T-S 10 ページ。 3.0/4.8l vitreous china one piece toilet s-trap 305/400mm

ページを印刷する

Firmly press the toilet gasket onto the

toilet outlet of plastic trap.

NOTE 1:

Wax ring type toilet gasket

should not be installed at temperatures

less than 21 C.

NOTE 2:

If you are using a toilet

gasket with an integral plastic sleeve,

make sure the gasket is positioned

with the sleeve facing away from the

toilet.

Install plastic to ground and mounted

with 3 set of bolts

(not supplied)

NOTE: Must use the toilet installation

gasket ring (not supplied) to seal the

area where the waste pipe contacts

the construction section to avoid

leakage.

Thread the supply hose onto the fill valve shank. See Fig.#9

Slide nut of inlet cover onto the supply hose, with flared end

last and run hose through toilet wall. See Fig.#10

Take hose guide apart and slide onto

the supply hose, with the flared end

last. Slide the two inserts into the

flared end of the hose guide. Insert

into toilet wall and tighten nut.

1392769-T01-C

Plastic Trap Outlet

firmly.

Fig.#9

Hose Guide

Toilet Gasket

Fig.#7

Fig.#8

Fig.#11

-4-

)

Fig.#10

(