- ページ 6

トイレ Kohler INNATE INTELLIGENT TOILETのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Kohler INNATE INTELLIGENT TOILET 31 ページ。

INSTALLATION

Remove Existing Toilet (If any)

Turn off the water supply. Flush the toilet， and use a sponge to remove the remaining water from the tank and

bowl. Disconnect water supply shut-off valve (if any)， and remove the residual tank and bowl.

Remove old gasket from the floor and toilet flange accessory bag with a putty knife. Dismantle residual T-bolts

and discard them.

NOTICE: if a new toilet is not installed immediately， temporarily stuff a rag in flange accessory bag.

B. Roughing-in

DANGER: Risk of electric shock. Disconnect power supply before servicing.

NOTE: This product is designed to work with wall mounted electrical and water supplies as shown in the mounting

dimensions.

WARNING: Risk of electric shock. Connect only to circuits protected by Ground-Fault Circuit-Interrupters (GFCI's)

or Earth-Leakage Circuit-Breakers (ELCB's).

Keep bath and shower head away from electrical parts (such as remote controller， receptacle etc). When the

electrical supply is mounted on the wall， an anti-splash and waterproof receptacle is required.

1382001-T01-A

Flange accessory package

Water inlet (G1/2 ID)

Fig 4

Mounting holes (total 5)

Fig 5

Unit: mm

Kohler Co.