- ページ 8
エンジン Kohler 5EのPDF オペレーションをオンラインで閲覧またはダウンロードできます。Kohler 5E 48 ページ。 Marine generator sets
ページを印刷する
Disconnecting the electrical load.
Hazardous
voltage
can
severe injury or death. Disconnect
the generator set from the load by
opening the line circuit breaker or by
disconnecting the generator set output
leads from the transfer switch and
heavily taping the ends of the leads.
High voltage transferred to the load
during testing may cause personal
injury and equipment damage. Do not
use the safeguard circuit breaker in
place of the line circuit breaker. The
safeguard circuit breaker does not
disconnect the generator set from the
load.
Short
circuits.
voltage/current can cause severe
injury or death. Short circuits can
cause bodily injury and/or equipment
damage.
Do not contact electrical
connections with tools or jewelry while
making
adjustments
or
Remove all jewelry before servicing the
equipment.
Testing
the
voltage
Hazardous
voltage
can
severe injury or death. High voltage
is present at the voltage regulator heat
sink. To prevent electrical shock do not
touch the voltage regulator heat sink
when testing the voltage regulator.
(PowerBoostt, PowerBoostt III, and
PowerBoostt V
voltage
models only)
Electrical backfeed to the utility.
Hazardous backfeed voltage can
cause severe injury or death.
Connect the generator set to the
building/marina electrical system only
through an approved device and after
the building/marina main switch is
opened. Backfeed connections can
cause severe injury or death to utility
personnel working on power lines
and/or personnel near the work area.
Some states and localities prohibit
unauthorized connection to the utility
electrical
system.
ship-to-shore transfer switch to prevent
interconnection of the generator set
power and shore power.
IV
Safety Precautions and Instructions
Testing
cause
Hazardous voltage or current can
cause severe injury or death. Have
trained and qualified personnel take
diagnostic
circuits.
equipment with electrically insulated
probes and follow the instructions of the
test equipment manufacturer when
performing voltage tests. Observe the
following precautions when performing
voltage tests: (1) Remove all jewelry.
(2) Stand on a dry, approved electrically
insulated mat. (3) Do not touch the
enclosure or components inside the
enclosure.
system to operate automatically.
Hazardous
(600 volts and under)
Hot Parts
repairs.
regulator.
cause
Hot coolant and steam.
Can cause severe injury or death.
Before removing the pressure cap,
stop the generator set and allow it to
cool. Then loosen the pressure cap
to relieve pressure.
regulator
Hot engine and exhaust system.
Can cause severe injury or death.
Do not work on the generator set until
it cools.
Install
a
live
electrical
circuits.
measurements
of
live
Use adequately rated test
(4) Be prepared for the
WARNING
WARNING
Checking the coolant level.
coolant can cause severe injury or
death.
Allow the engine to cool.
Release pressure from the cooling
system before removing the pressure
cap. To release pressure, cover the
pressure cap with a thick cloth and then
slowly turn the cap counterclockwise to
the first stop. Remove the cap after
pressure
has
been
released and the engine has cooled.
Check the coolant level at the tank if the
generator set has a coolant recovery
tank.
Servicing the exhaust system. Hot
parts can cause severe injury or
death. Do not touch hot engine parts.
The engine and exhaust system
components become extremely hot
during operation.
Moving Parts
WARNING
Hazardous voltage.
Moving rotor.
Can cause severe injury or death.
Operate the generator set only when
all guards and electrical enclosures
are in place.
TP-5985 10/02
Hot
completely