- ページ 4
エンジン Kohler COMMAND PRO CS8.5のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Kohler COMMAND PRO CS8.5 21 ページ。 Horizontal crankshaft
Kohler COMMAND PRO CS8.5 にも： オーナーズマニュアル (20 ページ), オーナーズマニュアル (20 ページ)
ページを印刷する
Air Cleaner
Air Cleaner
Cover Retaining
Knob
Fuel
Shut-Off
Choke Lever
Retractable Starter
Figure 1. Location of Controls and Service Points on CS Engines.
Oil Recommendations
Using the proper type and weight of oil in the crankcase
is extremely important. So is checking oil daily and
changing oil regularly. Failure to use the correct oil, or
using dirty oil, causes premature engine wear and
failure.
Oil Type
Use high quality detergent oil of API (American
Petroleum Institute) service class SG, SH, SJ or
higher. Select the viscosity based on the air
temperature at the time of operation as shown in the
following table.
Synthetic oils should not be used.
Figure 2. Viscosity Grades Table.
4
Fuel Tank Cap
Fuel Tank
On/Off Switch
(some models)
Muffler
Oil Sentry
Light
Spark Plug
Valve Cover
Throttle Lever
NOTE: Using other than service class SG, SH, SJ or
A logo or symbol on oil containers identifies the API
service class and SAE viscosity grade. See Figure 3.
Figure 3. Oil Container Logo.
Refer to "Maintenance Instructions" beginning on
page 8 for detailed oil check and oil change
procedures.
Muffler Shield
Oil Fill/
Check Plug
higher oil or extending oil change intervals
longer than recommended can cause engine
damage.
Carburetor
Oil Drain