- ページ 9

エンジン Kohler K301のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Kohler K301 17 ページ。 3/4 inch high-flow deck/rim mount bath valve
Kohler K301 にも：オーナーズマニュアル (14 ページ), インストレーション・マニュアル (40 ページ), オーナーズマニュアル (17 ページ), 多言語取扱説明書 (8 ページ)

ページを印刷する

Wing

Nut

Air Filter

Precleaner

Figure 6. Air Cleaner Housing

Components.

Check the air cleaner daily or before starting the

engine. Check for buildup of dirt and debris around

the air cleaner system. Keep this area clean. Also

check for loose or damaged components.

Replace all

bent or damaged air cleaner components.

NOTE:

Operating the engine with loose or damaged

air cleaner components

could allow unfiltered

air into the engine causing premature wear

and failure.

Service Precleaner

Wash and reoil the precleaner

every 25 hours of

operation,

(more often under extremely

dusty or dirty

conditions).

1 .

2 .

3 .

4 .

5 .

6 .

Remove the wing nut and air cleaner cover.

Remove the precleaner

from the paper element.

NOTE:

Wash the precleaner

in warm water with

detergent.

Rinse the precleaner

thoroughly

until

all traces of detergent

are eliminated.

Squeeze

out excess water (do not wring). Allow the

precleaner to air dry.

Saturate the precleaner

with new engine oil.

Squeeze out all excess oil.

Reinstall the precleaner

over the paper element.

When precleaner

replacement

is necessary

always use genuine Kohler parts.

Service Paper Element

Every 100 hours of operation

(more often under

extremely

dusty or dirty conditions),

replace the

element.

1. Remove the precleaner

(if so equipped) from the

paper element.

2 .

3 .

5 .

Do not wash the paper element or use

pressurized

air, as this will damage the element.

Replace a dirty, bent, or damaged element with a

genuine Kohler element. Handle new elements

carefully; do not use if the sealing surfaces are

bent or damaged.

When servicing the air cleaner, check the air

cleaner base. Make sure it is secured and not

bent or damaged. Also check the air cleaner

cover, seals and breather tube for damage or

improper fit. Replace all damaged air cleaner

components.

Reinstall the paper element, air cleaner cover

and wing nut. Wing nut must be finger tightened

to l/2 to 1 full turn after nut contacts cover. Do

not overtig hten.

When air cleaner element replacement

necessary always use genuine Kohler parts.

Clean Air Intake/Cooling

Areas

To ensure proper cooling, make sure the grass screen,

cooling fins, and other external surfaces of the engine

are kept clean at all times.

Every 50 hours of operation

(more often under

extremely

dusty, dirty conditions),

remove the blower

housing and other cooling shrouds. Clean the cooling

fins and external surfaces as necessary.

Make sure

the cooling shrouds are reinstalled.

Operating the engine with a blocked grass

screen, dirty or plugged cooling fins, and/or

cooling shrouds removed, will cause engine

damage due to overheating.

Check Spark Plug

Every 100 hours of operation,

remove the spark plug,

check its condition,

and reset the gap or replace with a

new plug as necessary.

Use a Champion@ type RHIO

(or equivalent)

spark plug.

1 .

2 .

Before removing the spark plug, clean the area

around the base of the plug to keep dirt and

debris out of the engine.

Remove the plug and check its condition.

Replace the plug if worn or reuse is questionable.

NOTE:

Do not clean the spark plug in a machine

using abrasive grit. Some grit could

remain in the spark plug and enter the

engine causing extensive

wear and

damage.