- ページ 7

ポータブル発電機 Kohler 12RESのPDF オペレーションをオンラインで閲覧またはダウンロードできます。Kohler 12RES 48 ページ。 Residential/commercial generator sets
Kohler 12RES にも：操作マニュアル (36 ページ), インストレーション・マニュアル (44 ページ)

ページを印刷する

Hazardous Noise

CAUTION

Hazardous noise.

Can cause hearing loss.

Never operate the generator set

without a muffler or with a faulty

exhaust system.

Engine noise. Hazardous noise can

cause hearing loss. Generator sets

not equipped with sound enclosures

can produce noise levels greater than

105 dBA. Prolonged exposure to noise

levels greater than 85 dBA can cause

permanent hearing loss. Wear hearing

protection when near an operating

generator set.

Hazardous Voltage/

Moving Parts

DANGER

Hazardous voltage. Moving parts.

Will cause severe injury or death.

Operate the generator set only when

all guards and electrical enclosures

are in place.

WARNING

Hazardous voltage. Backfeed to

the utility system.

Can

cause

property

severe injury, or death.

If the generator set is used for

standby power, install an automatic

transfer switch to prevent inadvertent

interconnection

standby

normal sources of supply.

TP-6515 2/21

Welding the generator set.

Can

cause

equipment damage.

Welding on generator set will cause

serious damage to engine electronic

controls components. Disconnect all

engine electronic control connections

before welding.

Grounding

Hazardous voltage will cause severe

injury or death.

possible

present. Ensure you comply with all

applicable

Electrically ground the generator set,

transfer switch, and related equipment

and electrical circuits. Turn off the main

circuit breakers of all power sources

before servicing the equipment. Never

contact electrical leads or appliances

when standing in water or on wet

ground because these conditions

increase the risk of electrocution.

Welding on the generator set. Can

cause severe electrical equipment

damage.

generator set perform the following

steps: (1) Remove the battery cables,

negative (- ) lead first. (2) Disconnect

all engine electronic control module

(ECM) connectors. (3) Disconnect all

generator set controller and voltage

regulator circuit board connectors.

(4) Disconnect the engine battery-

charging

(5) Attach the weld ground connection

close to the weld location.

Connecting the battery and the

battery charger. Hazardous voltage

will cause severe injury or death.

Reconnect

positive to positive and negative to

negative, to avoid electrical shock and

damage to the battery charger and

battery(ies).

electrician install the battery(ies).

Short

circuits.

voltage/current will cause severe

damage,

injury or death. Short circuits can

cause bodily injury and/or equipment

damage.

connections with tools or jewelry while

making

and

Remove all jewelry before servicing the

equipment.

CAUTION

severe

electrical

equipment.

Electrocution is

whenever

electricity

codes

and

standards.

Before welding on the

alternator

connections.

the

battery

correctly,

Have

qualified

Hazardous

Do not contact electrical

adjustments

repairs.

Electrical backfeed to the utility.

Hazardous backfeed voltage can

cause severe injury or death. Install

a transfer switch in standby power

installations to prevent the connection

of standby and other sources of power.

Electrical

backfeed

electrical system can cause severe

injury or death to utility personnel

working on power lines.

Wear

protective

clothing when using power tools,

hand tools, or compressed air.

Heavy Equipment

WARNING

Unbalanced weight.

Improper lifting can cause severe

injury or death and equipment

damage.

Do not use lifting eyes.

Lift the generator set using lifting bars

inserted through the lifting holes on

the skid.

Safety Precautions and Instructions

into

utility

goggles

and