- ページ 9
ポータブル発電機 Kohler 14/20RESのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Kohler 14/20RES 48 ページ。 Residential/commercial generator sets
This manual provides operation and maintenance
instructions
for
residential/commercial
14/20RES and RESL generator sets equipped with
Residential Digital Control (RDC) or Digital Control (DC)
generator set/transfer switch controllers. The RDC and
DC controllers control the generator set and the optional
Model RRT transfer switch. See Figure 1.
This generator set is approved for use in stationary
applications in locations served by a reliable utility
power source. Have the generator set installed by an
authorized distributor/dealer or service technician.
Refer to TP-6733, Installation Manual, for installation
instructions.
Information in this publication represents data available
at the time of print. Kohler Co. reserves the right to
change this publication and the products represented
without notice and without any obligation or liability
whatsoever.
Read this manual and carefully follow all procedures
and safety precautions to ensure proper equipment
operation and to avoid bodily injury. Read and follow the
Safety Precautions and Instructions section at the
beginning of this manual. Keep this manual with the
equipment for future reference.
The equipment service requirements are very important
to safe and efficient operation. Inspect the parts often
and perform required service at the prescribed intervals.
Obtain service from an authorized service distributor/
dealer to keep equipment in top condition.
Figure 1 RES/RESL Generator Set and Optional
Model RRT Transfer Switch
TP-6734 5/10
List of Related Literature
model
Figure 2 identifies related literature available for the
generator sets covered in this manual. Only trained and
qualified personnel should install or service the
generator set.
Literature Type
14/20RES/RESL Generator Set
Installation Manual
Model RRT Transfer Switch Operation/
Installation Manual
Figure 2 Generator Set Literature
Nameplate
The following illustration shows a typical generator set
nameplate. Copy the model, serial, and specification
numbers from the nameplate into the spaces provided in
the product information section on the inside front cover
of this manual. See Section 1.7 for the nameplate
location.
TP-6734
Introduction
Part Number
TP-6733
TP-6751
GM12070
Introduction
9