- ページ 21

ポータブル発電機 Kohler 18RESNTのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Kohler 18RESNT 40 ページ。 Residential/commercial generator sets
Kohler 18RESNT にも：オペレーション (48 ページ)

ページを印刷する

Procedure to Convert from NG to LP

1. Place the generator set master switch in the OFF

position.

2. Disconnect the power to the battery charger.

3. Disconnect the generator set engine starting

battery, negative (--) lead first.

4. Turn off the fuel supply.

5. Remove the hose clamp and fuel hose from the

hose fitting. See Figure 1-15.

Fuel System Detail

1. Hose fitting (LP orifice fits inside; see Figure 1-16)

2. Regulator

3. Fuel valve

4. Fuel inlet, 1/2 in. NPT female

5. Fuel hose with clamp

6. DSAI connector location (see Figure 1-18)

Figure 1-15 Fuel System Components, Air Inlet Side,

17/18 kW Shown

TP-6516 4/09

GM51561A-D

6. Place the orifice into the hose fitting.

Figure 1-16.

1. LP orifice

Figure 1-16 LP Fuel Orifice Installation

7. Slide the hose onto the hose fitting and secure it

with the clamp.

8. Disconnect the digital spark-advance module

(DSAI) leads for LP. (Connect the leads for natural

gas.) See Figure 1-17 and Figure 1-18.

Fuel

Natural Gas

Figure 1-17 DSAI Connection

1. DSAI leads 65 and N5: connect for natural gas,

disconnect for LP

Figure 1-18 Digital Spark Advance (DSAI) Leads

2. Hose fitting

DSAI Leads

Disconnect

(located in generator set air intake area)

Section 1 Installation

See

tp6514

3. Regulator

Connect

tp6514