- ページ 13

体重計 acaia AC002のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。acaia AC002 15 ページ。
acaia AC002 にも： ユーザーマニュアル (15 ページ)

ページを印刷する
acaia AC002 ユーザーマニュアル

Error Codes

Error Code
Description
Access Code Error, unrecognized access code.
100
EEPROM error, unable to access memory. Please contact Acaia support.
101
AD error, unable to access weighing signal. Please contact Acaia support.
102
Unable to find acceptable starting Zero point, most likely due to loadcell
303
damage caused by excessive force or drop. Please contact Acaia support.
Over load: the weight is over the maximum capacity.
Under load: the weight is under the minimum capacity.
Calibration error. Calibration cannot proceed when environmental noises are
304
too strong. Please calibrate in a stable environment free of wind, vibration, etc.
Password error (the default password is 0000)
904
_H2O
Water in the Power button
Water in the Tare button
H2O_
Water in the Power button and Tare button
_H2O_
Other
Display Code Description
The scale is in update mode.
UPdAtE
Note: If you want to leave update mode, please connect the scale's USB to a
power source.
13