- ページ 5

ディスペンサー acaia ORION BEAN DOSERのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。acaia ORION BEAN DOSER 15 ページ。
acaia ORION BEAN DOSER にも：操作マニュアル (11 ページ)

Chapter 2: Getting Started

2.1 Initial Setup

1. Prior to using your Orion for the ﬁrst time you should rinse and clean the bean hopper

in warm soapy water. Dry immediately after cleaning.

2. Attach the bean hopper on top.

3. Place a container on the weighing platform to avoid accidental dispensing.

4. Connect the power cord to the Orion.

5. Place coffee beans into the hopper.

2.2 Getting Started

1. Make sure that the weighing platform is clean.

2. Turn on the Orion by pressing Power and place the container on the platform.

3. Set target weight by short pressing Power. Adjust values with Dial then short press

Power to conﬁrm.

4. Press Dose to start dosing. If the display shows [ CUP ] [ rESEt ], please place a

container on the platform.

5. When a dose is complete, press Power to return to dosing.

2.3 General Operation

The Orion is designed for dosing portions of beans from 5 grams to a maximum of 3000

grams per dose with an accuracy of +/- 2 beans (~0.5 g).

There are two dosing modes in the Orion — Manual mode and Auto mode. To choose

between modes, long press the Power button and the display will show the current mode

of operation. Rotate the dial to switch modes.