自動車アクセサリー A-Tach Mounts 20016のPDF マニュアルをオンラインで閲覧またはダウンロードできます。A-Tach Mounts 20016 2 ページ。

A-Tach # 20016

Designed for: RAM Trucks 2019 - 20__

WARNING: Please hold the vehicle mount and holster over the place where the solution attaches to the

dash BEFORE securely attaching it to the vehicle. This will insure you like the fit and location of the solution.

(1) The holster comes with a two part securing strap

for the hand gun. Place your hand gun into the

holster. Then snap the two parts of the strap

together and place the strap in a position that will

secure the hand gun into the holster.

NOTICE: A-Tach Mounts will not be responsible for

any damage to the vehicle due to the installation

and/or use of the product. The product has been

tested to fit securely to the listed vehicles.

Instructions are provided for your convenience.

You are responsible for the use of the product and

to determine if you have the skill to attach the

product without causing damage to your vehicle or

the product.

Read all instructions and view the photos before

attaching this product.

(2) Slide the hooked parts of the Velcro on the

strap into the slots on the sides of the holster.

Using the included blue card stock will help. The

strap is adjustable by the distance the straps are

inserted into the slots. Be sure to align the hooked

parts of the Velcro with the mesh parts to create a

secure connection.

(3) Consider if you want the holster for right hand

use or left hand use. Attach the holster to the

mount by inserting the clip arm on the mount

through the clip slot on the side of the holster.

Photo is for illustration and might not show the

actual mount.

A-Tach

Mobile Device Mounts