- ページ 9

産業機器 AQC MAXIREACH EBD-61005のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。AQC MAXIREACH EBD-61005 16 ページ。 Pivoting extension boom

Pivoting Extension Boom

9.1

Required tools

The following tools and equipment are required for the assembly of the swing boom:

• Crane or lift truck

• Chains

• Slings

• Shackles

• Eye bolts

• Spikes

• Wrench

Other tools may be required. It is advised to obtain services from a qualified contractor with

appropriate equipment for proper installation.

9.2

Assembly (boom base pivot)

1 . Prepare the area where the swing boom will be installed making sure it is clear and free of

any obstacle.

2 . Install boom base at appropriate or specified height. It is suggested to use minimum grade

5 fasteners to support boom base on support structure. Boom base may also be welded to

support structure when permitted. CAUTION: Boom base has to be installed level (horizontally

and vertically) to prevent "coasting" of horizontal steel tube.

6" (150MM) DIAMETER BOOM BASE DIMENSIONS

31.29/795

11.69/297

23.5/594

7/178

• Sockets

• Power drill

• Concrete drill bit

• Anchors

• Bolts

• Self tapping screws

33.39/848