- ページ 3

集塵機 AQC MAXIHYDRO MS-010のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。AQC MAXIHYDRO MS-010 14 ページ。

Wet type dust collector

1 INTRODUCTION

This present manual refers to the MAXIHYDRO wet dust collectors. It includes important

information concerning the installation, operation and maintenance of your collector. Read this

manual thoroughly and apply the directives and procedures. Staff and personnel using the system

will have to be trained on safety measures and maintenance instructions.

The TYPE A MS scrubber is designed to filter explosive metal dusts such has aluminum. It can filter

any particulate dust that sinks in a pool water. There are no moving parts, filtration is provided by

the dusty air being forced through a determined water level, this causing a violent water agitation

and mist the air must then go around baffles and water eliminators after which the cleaned air is

returned to the plant.

TYPE B MS scrubber use a drag bar conveyor to mechanically remove sludge from the settling tank

to discharge it in a container. An added instruction manual that covers the conveyor is supplied

separately. TYPE UM scrubbers are of a low silhouette design. A spray system is installed at the

bottom of the settling tank to fluidize the sedimented sludge where it is drained to a conveniant

INFORMATION ON MAXIHYDRO SYSTEM

Model:

Delivery date:

Name of customer:

Address:

Accessories:

Other:

WARNING!

Not following directives and procedures could cause

injuries or property damages.

Serial number:

Date of installation: