- ページ 5

コントローラー a-TroniX X45/10のPDF 据付・取扱説明書をオンラインで閲覧またはダウンロードできます。a-TroniX X45/10 16 ページ。 Mppt solar charge controller

Machine Translated by Google

operation manual

MPPT solar charge controller X45/10

2. Important Safety Instructions

Be sure to follow all warnings and instructions in this manual.

Keep them safe and read the following notes carefully before installing and starting

up the device.

The operating instructions must be read and understood by all persons and

specialists who work with this device and all points must be observed.

Do not try to disassemble the device. It contains no user-serviceable parts. During

installation, operation or maintenance carried out by qualified personnel, observe

the local safety instructions and the relevant laws. Otherwise personal injury or

equipment damage may occur.

The safety instructions in this manual serve as a supplement to the local safety

instructions. Our company assumes no liability for damage caused by non-

observance of the safety instructions.

This also applies if no regular maintenance or maintenance/repairs were not carried

out by qualified specialist personnel. The device must also be set up by qualified

specialist personnel.

The solar charge controller may only be used in photovoltaic systems that comply

with these operating instructions. Likewise, only solar modules that meet the

requirements of the controller may be used. No other energy sources may be

connected to the solar charge controller.

Any further use or use that goes beyond this is considered to be improper and

can lead to personal injury, damage to property and/or damage to the device.

The batteries store a large amount of energy. Therefore, be careful not to

short-circuit the battery.

We recommend installing a fuse or circuit breaker on the positive (+)

terminal between the battery and ESC. The fuse or switch should not be

more than 15 cm from the battery post.

Batteries can produce flammable gases (oxyhydrogen). Therefore, avoid

sparks and/or flames near the battery.

Make sure the battery is in a well-ventilated place.

Avoid touching or shorting wires or terminals.

The voltage on wires or terminals can be many times higher than the

battery voltage itself.

Only use insulated tools.

Keep children away from all electrical devices/connections etc.

02/2022

page 5