- ページ 3

分析機器 Dexeq Video Phone InspectorのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Dexeq Video Phone Inspector 5 ページ。

W button: direct white light, white side light (X) ,white side light (Y) Tip: Keys can be controlled by device or client software(on

the device screen/tablet/phone/computer screen.

IR button: direct IR 850 nm light, direct IR 940 nm light, side light IR 850 nm (X), side light IR 850 nm (Y).

UV button: UV A light, infrared laser 980 nm (anti-Stokes), UV C light(optional).

S button: Infrared fluorescence 470 nm (IRF), cycle of all the lights.

1. Turn on the Video Phone Detector, when the loading is completed, the button W is flashing and the device is ready to be

connected.

2. In your (phone/tablet/PC) open settings => WiFi =>find the (SSID) "SZGR_38 ********" => connect to this hotspot (default

password: 88888888) . Next time , if you save the connection, you will be connected automatically. If not, ple-ase follow this step

again.

3. When the WiFi is connected, open the app VideoMouse.

Note: When connection failed, restart the Video Phone Inspector and follow the process above or recharge the battery.

When switching between different Video Phone Inspector, or other authentication devices. iOS: settings => WiFi =>

"SZGR_**********" => switch between different hotspot.

Android / Windows: you can switch directly in the app Video Mouse, go to settings => WiFi setting => point to switch a different

SSID.

1. Status:

Note: Auto power off time is the time from device to the shutdown. If the device is in sleepmode, the automatic shutdown is valid,

if active.

Device code: you can find the code at the back of the Video Phone Inspector: (SSID) "SZGR_38 ********". Device WiFi

account: the same as the device code; WiFi password: default password "88888888". .

When the power indicator light is lit for 10 seconds, then When the start of the is set to not time is still bottom of the

Connection status 2.

camera area: Battery level Take pictures Show or hide buttons

3. Light source buttons switching:

4. Help, settings: help settings options

5. Gallery: Local library Device List