- ページ 9

ヒーター 2VV ESSENSSE NEO BASICのPDF 据付・取扱説明書をオンラインで閲覧またはダウンロードできます。2VV ESSENSSE NEO BASIC 14 ページ。

CONTROL THE DELIVERY
PLEASE NOTE
Check the product for damages immediately after delivery In
case damage on the packaging, contact the carrier Claims not
filed in due time will be disregarded.
Check that it corresponds to the type of product ordered.
In case of discrepancy, do not unpack the product and con-
tact the vendor.
After unpacking, check that the product and all the other
components are in good order. In case of doubt, contact
the vendor.
Do not install a damaged unit!
If you will not unpack the product immediately after delive-
ry, store it indoors, in a dry place with ambient temperatu-
res between +5 °C and +40 °C.
All the packaging material is
environmentally friendly and can be
reused or recycled. Contribute actively to
the protection of the environment and
ensure the proper disposal or recycling
of the packaging materials.

1. INSTALLATION

1.1 CONNECTING THE CONTROL AND ACCESSORIES
E
RGJ-VCE2-BA-
230-AC
-
*A cable with a minimum cross-section of 6x0.5mm
*The maximum recommended length of the cable is 100 m.
+40
C
o
+5
o
C

PACKAGE CONTENTS

1x
1x
1x
1x
1x
PLEASE NOTE
If the unit was transported in temperatures lower than 0°C,
after unpacking, leave it in operational conditions for at
least two hours without activating in order to compensate
the inner temperature.
?
is recommended for connecting the control.
2
9