ページを印刷するGeneral Comments
The aim of the manual is to provide you with all the necessary information for a proper installation and maintenance in
order to give you optimum results whilst in operation.
For this reason it is really important reading with attention the instructions given below since they furnish all the
indications necessary for the sureness of the installation, use and maintenance.
This manual has to be preserved with care to be consulted in whatever occasion.
plant.
Do not leave the equipment exposed to the action of the atmospheric agents.
The equipment has to be operated from skilled person.
In case of improper functioning of the panel switch off and contact our technical assistance for any necessary
repairs.
Design standard
In order to obtain an high trustworthiness and a lasting functioning of the product it is necessary to follow with
attention our manual particularly in reference with the maintenance.
The Producer declines all responsibility in reference with whatever intervention on the equipment
Technical Characteristics
Material:
PVC
PP
NBR
Max. Temperature:
50°C
Lance(B)
H400
H490
H700
H940
H1420
Probe level:
Material:
PP
Electrical characteristics
V Max: 250 VAC
Max current: 0,5A
P Max: 10W
Installation on A-TANK
Using a cup Cutter drill the upper tank (as in Fig. 1).
Mount rubber sleeve D = 40mm
Mount ring D = 34 mm
Adjust the position of the junction block pipe according to the
height tank and then tighten the knob Boarding (Fig. 2).
29/04/11
from not skilled personnel.
A (ADJUSTABLE)
ADSP7000524 Rev.1
he electrical
3 / 5