エクステンダー AvLab AVLAB-US50のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。AvLab AVLAB-US50 2 ページ。 4-port usb 2.0 extender
ページを印刷するFeatures
• Support four USB peripheral devices
• Support USB 1.0, USB 1.1 and USB 2.0
• Extend the distance up to 264 ft
(80 meters) via Cat6 cable
• Support suspend/resume detection
• Do not require additional drivers
• Support hot plug function
Package contents
• 4-Port USB 2.0 Extender-TX
• 4-Port USB 2.0 Extender-RX
• USB Type-A to Type-B cable
• Power adapter DC 5V/2A
• Quick Start Guide
Layout
TX
RX
1. Equalization Dip Switch
2. USB Host: connect to USB host
3. RJ45: Connect to Ethernet cable
4. Ethernet cable Power indicator
5. Ethernet cable Signal indicator
6. USB Device: connect to USB device
7. USB Device: connect to USB device
8. Equalization Dip Switch
9. Power jack: connect to 5V/2A adapter
10. RJ45: Connect to Ethernet cable
11. Ethernet cable Power indicator
12. Ethernet cable Signal indicator
Equalization DIP Switch
Use the dip switch to adjust equalization
level for different distance
Position
Description
Level 1
OFF[]OFF[]
Under 160ft
Level 2
OFF[]ON[]
PIN#1
Between 160ft to 230ft
PIN#2
Level 3
ON[]OFF[]
Between 200ft to 264ft
ON[]ON[] Reserved
Note:
1. TX & RX have to use the same setting
2. Depend on cable distance and quality
to choose a suitable equalization level