- ページ 8
アンプ Aavik acoustics I-880のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Aavik acoustics I-880 12 ページ。 Integrated amplifier
MENU FUNCTIONS
Note: In order to save your settings, set the amplifier in
standby mode by pressing the stand by button (
Using the front panel or remote control, you can change
many settings of the amplifier.
Using the remote, press the "Menu" button
or exit the menu. Using the front panel, press and hold
the menu button
for 3 seconds.
4
SETTINGS
PREAMP GAIN (SETTINGS FOR INDIVIDUAL INPUTS)
Using this function you can set the gain of the selected input. The gain number shown, is the gain between the input and pre out.
The power amp adds 26dBs of gain.
BALANCE
Using this function, you can change the left/right balance in 6 1dB steps.
PRE OUT MUTE
This setting can be set either on or off. With the default setting (On), the pre out connectors are muted with the speakers, when
muting is enabled. With pre out muting off, the pre out connectors will stay on, when the amp is muted. This function can be used
e.g. for running a headphone amp on the pre out connectors. With pre out muting off, you can change inputs and volume setting
with muting on. When you switch off muting again, the volume will return to the previous setting.
DISPLAY BRIGHTNESS
You can change the display brightness in four steps: 10, 40, 70 and 100%
DISPLAY DIM
Using this setting, you can set the display to switch off automatically after 1-5 seconds. The standard setting is off. When the
display is off, only the logo and touch buttons will be dimly lit.
8
When entering the menu, the gain setting of the cur-
/
).
rent input will be shown on the display. The top line
E
2
of the display shows the current option ("Preamp gain"
when entering the menu), and the bottom line shows
the current setting.Using the remote, cycle through the
options using the INPUT +
to enter
F
Using the front panel, press the menu button
cle through the options.
Use the VOLUME UP
of the remote, the up and down front panel buttons (
/
3
5
Once in the menu, using the remote, you can cycle
and INPUT –
buttons.
through all options in the order shown in the diagram
C
D
below.
to cy-
4
Using the front panel, the amplifier will return to normal
operation once cycled through all the options.
and VOLUME DOWN
A
) or the rotary knob
to change the settings.
7
DISPLAY SHOWS
buttons
B