- ページ 8
スイッチ AvLab AceProAvのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AvLab AceProAv 8 ページ。 4-port dvi dual-link smart console switch with usb 3.0 multi-media
ページを印刷する
MCU F/W update
1.
Connect the Micro-USB to USB cable between PC and device
2.
Set dip switch PIN#2 to ON[] and then power on device
3.
Open firmware update software and then select COM Port
4.
Click "MCU" button to open "MCU Firmware Update" windows
5.
Click "Load File" button to select the file which you want to write
into device.
6.
Click the "Start" button to start firmware update
7.
After updating, please set the dip switch PIN#2 to OFF [] and
power cycle the device
8