- ページ 11

金属探知機 AAVIX GC-1032のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。AAVIX GC-1032 15 ページ。

AAVIX GC-1032 オーナーズマニュアル
placed the sample, sweeping the search coil in a side-to-side
motion.
Search coil Sweeping Hints:
Never sweep the search coil as if it were a pendulum. Raising the
search coil while sweeping or at the end of a sweep will cause
false readings.
Sweep slowly, hurrying will cause you to miss targets.
It's better you sweep the search coil from side to side in an arc line
of 3 inches motion and keep the search coil parallel with the
ground
If the detector detects the item, it sounds a tone, and the cursor
above the target name will light. Also LCD displays the numeric
range of target as well as the depth(signal strength).
If the detector does not detect the item, make sure that the mode is
set correctly for the type of metal you're searching for. Also make
sure that you're moving the search coil correctly.
Notes:
The detector responds with a signal when it detects most valuable
metal objects. If a signal does not repeat after you sweep the
search coil over the target a few times, the target is probably junk
metal.
11