- ページ 3

消火器 A.B.S. FIREKILL 15226のPDF 技術データをオンラインで閲覧またはダウンロードできます。A.B.S. FIREKILL 15226 3 ページ。 1-3-6-9-12 kg powder abc

Technical Bulletin

ACCESSORIES ON REQUEST FIREKILL SYSTEMS

On request the firekill system can be electrically activated with automatical detection system.

In the scheme below you can see an example of automatical detection system for firekill system with all its options available

SIGN

LIGHTENING

BOX

Electric actuator (cod. 43001)

It can be connected with an emergency control push button or

through a control panel in case there is an automatic detection

system.

The electric actuator is a pyrotechnical charge, 5 years guaranteed

at a work temperature from -20°C up to +80°C and humidity of

100%. The pyrotechnical charge can work with minimum 12 V

tension and 1 A current.

Code 43001

TEMPETATURE DETECTOR (cod. 47038 - 47019)

The apparatus consists of two contacts mounted on two curved

strips of nickel-iron, the contacts are electronically isolated from

the strips, however, a complex that is called "crew" is in turn

mounted in stress conditions in a sheath consisting of a tube

extruded AISI. The temperature at which the sheath is taken. Any

change in temperature dilates the sheath, which thus increases the

tension that it exerts on the plate, swithing the contact, as

appropriate.

MINIBEND (cod. 28053)

MINIBEND FOR COPPER AND ALUMINUM PIPE FOR EXT.

Ø 8 - 10 - 12 mm IDEAL TO BEND FIREKILL PIPES

Code 28053

Lombardia Street 310, 20861 S.Dam. Brugherio

Tel. +39 - 039 - 839631 - Fax. +39 - 039 - 8396349

1370

e-mail:[email protected]

Code 47038

preset at 141°C

Code 47019

preset at 68°C

DATI TECNICI - Technical Data :

Temp. di intervento – Alarm Temeperature:

Temp. ambiente – Ambient Temperature:

Materiale Conduttori - Conductors material:

Resistenza Conduttori Conductors resistance:

Tensione di lavoro Operatine Voltage:

Materiale isolamento - Insulation material:

Guaina esterna – Outer Jacket

Diametro cavo- Overall cable dia.:

Approvazione - Approval:

Technical data are subject to modification

for improvements without prior notice

a.b.s. S.r.l. (Milan) Italy

www.absfire.it

Capital euro 2,000,000.00

Code 23023

MARINE CONTROL BOX (cod. 23023)

The central unit and control unit are manufactured with materials

immunes to the marine environment and supplied in IP65 version.

Furthermore, the chassis ensures adequate heat dissipation

which allows long periods of operation. It controls all the above

illustrated device. It can be programmed in 4 languages.

Central unit CPU

CONTROL BOX (cod. 23022 or 23022_1)

This unit is used in combination with Firekill extinguishing system for

boat engine or electrical board.

Led green indicates that circuit is operative

Red light indicates that extinguisher has been discharged.

Alarm audible buzzer included in the units will sound when system

has been activated. Remove safety pin, open door, press red button

inside to activate discharge.

Control Box

Cod.23022

180° C - 356° F

max. 105° C (221 ° F)

Acciaio – Steel.

~0,66 KΩ/Km

42Vdc, 30Vac max.

T ermosensibile- Heat sensing

EPC

4mm

UL, FM

Fire Extinguisher

Code 23023

Dash board

remote unit

Control Box

Cod.23022_1

THEMOSENSIBLE CABLE

Data Sheet

Code

Date

Check

15241

22/02/15

Rev

Pag.

3/3

/AL