- ページ 5

芝生とガーデン用品 Aqua Control SELECT Series 2のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Aqua Control SELECT Series 2 19 ページ。 Display aerator

ページを印刷する
1.
Remove the screws with lock washers from the threaded holes in the nozzle.
2.
Open the packet of petroleum jelly and apply it generously to the O-ring on the flange of the
nozzle.
3.
Slide the flange of the nozzle into the head, lining up the holes.
4.
Re-attach the hardware removed in step #1.
1.
Remove the screws with lock washers from the spray cone; and the hex-head bolts, lock
washers, and flat washers from the discharge head spoke.
2.
Remove the hardware in the center row of holes in the head using a 5/16" wrench on the cap
nut. This hardware will not be reused.
3.
Open the packet of petroleum jelly and apply it generously to the o-ring on the flange of the
nozzle.
4.
Holding the nozzle by the tip of the threaded rod, line up the threaded holes of the discharge
head spoke with the center row of holes in the head. Slide the discharge head spoke inside
the head and attach with the hex head bolts, lock washers, and flat washers removed in step
#1.
5.
Slide the flange of the spray cone into the head, lining up the holes.
6.
Re-attach the screws with lock washers removed in step #1.
7.
The nozzle has been pre-set at the factory.
NOZZLE TYPE 1 – MULTIPLE NOZZLE CASTING/SPRAY CONE
NOZZLE TYPE 2 – SPRAY CONE WITH DISCHARGE HEAD SPOKE
Aqua Control, Inc. 60 Hz. Select Series 2 Instruction Manual
Aqua Control, Inc. 60 Hz. Select Series 2 Instruction Manual
NOZZLES
HEAD
DISCHARGE
HEAD SPOKE
HEAD
Remove and dispose (step 2)
NOZZLE
LILY PLATE
SPRAY CONE
5