- ページ 4
ウォーター・ディスペンサー Aqua Cooler AC-CURVE-CT-HCのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Aqua Cooler AC-CURVE-CT-HC 7 ページ。
ページを印刷するDisplay and Control Panel Guide
Panel Indicators
1
Child Lock Indicator
2
Temperature Selection Dial
3
UV Filtration Indicator
4
Cooling Indicator
5
Low Water Indicator
6
Temperature Display
7
Water Volume Indicator
Panel Function Keys
8
Child Lock
9
Cup Volume Selection
10
Warm Water
11
Ambient Water
12
Hot Water
13
Cold Water
14
Water Extraction
BEFORE FIRST USE
1.
Open the water tank cover, remove the water tank and clean thoroughly.
2.
Pour tap water into the water tank until the highest water level "3500mL" position, and then put it back
into the main body.
3.
After plugging the appliance into the wall outlet, turn on the power switch [
appliance. The buzzer will sound 1 time, all indicator lights will switch on and then off, known as the locked
stage.
4.
Remove the leak-proof rubber plug at the bottom of the water outlet.
5.
Place a cup below the spout outlet (recommend over 300mL capacity), press the safety lock key
[
] for 1 second to unlock, then press the ambient water key [
key to dispense water.
6.
After the water is discharged, the cleaning procedure is completed.
Attention! When the appliance starts to heat up the water, in order to avoid dry-heating and protect the
machine, please extract a cup of ambient water before choosing hot water.
* There could be a temperature deviation of ±3°C
* There could be a volume deviation of ±10%, the actual temperature and volume depending on the
using environment and local tap water quality.
Attention! It is normal phenomenon that water droplets form after the water is dispensed.
Attention! At the time of first use, check whether there is water leaking from the product, and for any abnormal
noises, burnt smell or smoke. If you find any of the above situations, stop using the appliance
immediately, and contact Aqua Cooler for service.
WARNING! Do not take the water tank out or let the water tank empty when plugged in, otherwise, there will
be a warning signal.
6
Your Partner in Cool.
] on the side of the
] once and final press water extraction
Cold Water Function Activation
1.
Open the water tank cover, pour 1L or above tap water into water tank.
2.
Turn on the power switch [
] and cold switch [
3.
Touch the child lock [
] for 1 second to unlock, and then long press the cold water key [
3 seconds. The buzzer will sound 1 time, the cold-water activation program is auto started. After 30
seconds, The buzzer will sound 2 times, and activation is completed.
4.
CAUTION! During activation process, do not turn off the power of the appliance.
5.
The refrigeration indicator [ ] on the display panel will light up. After 5 minutes, there should be a
sense of cold in the cold water. Cooling system capacity stores approximately 500mL of water. The
refrigeration program will be completed after about 25 minutes, the indicator light [ ] will be off.
OPERATION INSTRUCTION
Operation Guide
1.
Turn on the power switch [
]; when using the cold water function, turn on the cold switch at the
same time [
], and touch the child lock [
2.
Touch the function key (warm water [
], normal water [
select the function, or turn the knob to select the temperature directly.
3.
Touch the cup volume selection key [
] to select the water volume 100mL, 150mL or 250mL.
4.
Touch the water extraction key [
], the appliance starts to dispense water. Touch the water extraction key
[
] once again to stop.
5.
After operation, turn off the power switch [
Function Description
• Child Lock Key: When the appliance is inactive for approx 1 minute, it will lock the screen automatically.
The child lock key [
] and the child lock indicator will light up on the display panel, and all keys cannot be
operated; the user can touch the child lock key [
child lock indicator will turn off. The display panel will show the last setting status at standby mode; if the
appliance power is removed and reconnected, it will restore the factory settings to the locked state.
• Cup Volume Selection Key: In the unlocked state, touch the cup volume selection key [
the water volume. There are 3 levels of water volume selection from [100mL] —> [150mL] —> [250mL] for
sequential cycles, and the corresponding selection will be shown on the display panel.
• Warm Water Key: In the unlocked state, touch the warm water key [
The user can rotate the knob to select the temperature or touch the cup volume selection key [
the cup volume.
• Normal Water Key: In the unlocked state, touch the normal water key [
the inlet water temperature value (the temperature of drinking water in the current environment). The user
can rotate the knob to select the temperature or touch the cup volume selection key [
volume.
• Hot Water Key: In the unlocked state, touch the hot water key [
user can rotate the knob to select the temperature or touch the cup volume selection key [
cup volume.
• Cold Water Key: In the unlocked state, touch the cold water key [
user can turn the knob to select the temperature or touch the cup volume selection key [
cup volume.
(Notice! If choosing the ice water function, please refer to the "Operation Guidelines").
] on the side of the appliance.
] for
] key for 1 second to unlock;
], hot water [
], or cold water [
] to
] and cold switch [
], and unplug the appliance.
] for 1 second to unlock, the child lock key [
] and the
] to select
], the display panel will show (45°C).
] to select
], the display panel will show
] to select the cup
], the display panel will show (100°C). The
] to select the
], the display panel will show (CO). The
] to select the
7