- ページ 2

メディア・コンバーター AVLink ADD-01IWのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AVLink ADD-01IW 2 ページ。 Hdmi audio delay conversion box

ページを印刷する

FRONT VIEW

1. HDMI Input

2. RS232 port

3. Input Power Jack

REAR VIEW

1. Coaxial output port

2. Analog output port

3. HDMI output port

Installation

1. Connect input equipment source to ADD-01IW.

2. Connect ADD-01IW to output device. (e.g. speaker).

3. Connect the power cord and turn on the ADD-01IW.

4. Turn on the source device.

-3-

Operation

Setting the audio delay time

1. Select the time unit to adjust by pressing the button

"CHG".

2. Then the selected time unit LED will keep flash. The

user can change to the next time unit by pressing "CHG".

Second => 100ms => 10ms => Second...

Adjust "second"

Adjust "100 ms"

Adjust "10 ms"

3. Pressing the "+" or "-" to increase /decrease the value

Old delay value 1.20 sec

Time unit to change: 100ms

"+" increase value from 2 to 3

"-" decrease value from 2 to 1

5. Stop operation and wait several second the LED stop

flashing, then the new audio delay time will take effect.

6. "+" and "-" can reset LED at the same time

Example:

Audio delay "1.20" second change to "0.50" second

Old audio delay time "1.20" second

-4-

1. Pressing button "CHG" to select time unit "second" to

change.

"Second" LED flash.

2. Pressing button "-" once to decrease 1 to 0.

3. Pressing button "CHG" to select time unit "100ms" to

change.

4. Pressing button "+" three times to increase 2 to 5.

5. Stop operation and wait the LED stop flashing, then the

new audio delay time "0.50" second take effect.

DIP Switch Settings

Select audio output channel from HDMI -input to "Analog" audio

output.

OFF,OFF

1-2 CH

OFF,ON

3-4 CH

1,2

ON ,OFF

5-6 CH

ON ,ON

7-8 CH

Trademarks:

All the companies, brand names, and product names

referred to this manual are the trademarks or

registered trademarks belonging to their respective

companies.

-5-