- ページ 11

照明器具 Avlite AV-OL-LIのPDF インストレーション＆サービスマニュアルをオンラインで閲覧またはダウンロードできます。Avlite AV-OL-LI 20 ページ。 Single low intensity obstruction light

7.0 Unpacking, Installation and Wiring



Unpack all hardware and inspect for damage. If there is any damage, please contact your Avlite Office.

Retain original packing material for possible future use in shipping.

Open the LI fixture. Please see section 'Opening and Closing the LI' for further information.

Connect the provided input power cable according to DC installations as shown in the wiring diagram on the following

page.

Note: The fixture must be wired by a qualified electrician.

Thread a 3/4 inch pipe thread cord grip to the LI and attach the light to an owner supplied bracket or optional Avlite

Right Angle Mounting Bracket (for low intensity fixtures) with a locking nut.

Note: Make sure the mounting pole is vertically aligned to guarantee the required beam pattern of the obstruction

light. Make sure the light's beam pattern is not disturbed by any nearby obstacles

WARNING:

DO NOT connect directly to an unregulated power source. Connecting to an unregu-

lated source may result in damage.

WARNING:

Do not stare into light emitting diode (LED) beams.

WARNING:

LED lights contain glass components. Do Not Drop.

Always follow the instructions outlined in the product manual when cleaning the

equipment. Improper cleaning methods and use of unauthorized cleaning agents

can damage equipment.

Want the latest product information?

Visit