- ページ 7

アンテナ A.H. Systems AK-26GのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。A.H. Systems AK-26G 10 ページ。 Antenna kit

A.H. Systems AK-26G Antenna Kit

impedance (10 K ohm or greater) input. Calibrations for both inputs are

provided.

CURRENT PROBES

BCP-510 LF Current Probe 20 Hz - 1 MHz

BCP-511 HF/VHF Current Probe 100 kHz - 100 MHz

The current probes come ready for use.

Operation: The two current probes measure conducted emissions when

clamped around a single conductor, cable or a bundle of conductors.

Disconnect the probe latch Position the probe around the conductor and

close the probe. Reconnect the probe latch to ensure that the probe is

tightly closed. Connect the probe connector to the receiver with a cable.

The probe calibrations supplied are into a 50-ohm receiver.

TRIPOD AND MOUNTING ADPTERS

ATU-510 Tripod

AEH-510 Azimuth and Elevation Head

The azimuth and elevation head (AEH-510) mounts to the tripod (ATU-510)

top and allows the antennas to be rotated 360 degrees and tilted between

horizontal and vertical polarization. The tripod and azimuth and elevation

head come in their own carrying case. Each tripod leg is independently

adjustable in angle and length to facilitate antenna height setting. The tripod

legs have a rubber tip on one end for indoor or hard surface use, and a

metal spike on the other end for outdoor soft surface (such as dirt) use.

TRANSIT STORAGE CASES

TCC-510 Tripod Carrying Case

TSC-542 Transit Storage Case

The antenna carrying case (TSC-542) prevents damage and loss of

antennas when storing or transporting the antenna kit. The case is

constructed of lightweight and durable polyethylene. Two case keys are

provided with the case.

OPTIONAL EQUIPMENT

The AK-26G case comes with three additional cutouts for optional

preamplifiers. In order to improve overall system sensitivity, the following

equipment will be required:

 A.H. Systems inc. – January 2005

REV A