- ページ 9

アンテナ A.H. Systems AK-40GのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。A.H. Systems AK-40G 20 ページ。 Antenna kit

A.H. Systems AK-40G Antenna Kit

perpendicular to the ground. Connect a cable between the antenna

connector and the receiver. NOTE: BE SURE TO USE A CABLE RATED

FOR HIGH FREQUENCY WHEN OPERATING ABOVE 5 GHz (for example,

the SAC-18G-3 or SAC-40G-1.5).

MAGNETIC LOOP ANTENNA

SAS-560 Magnetic Loop Antenna 20 Hz - 2 MHz

The loop antenna does not require any assembly.

Operation: The loop antenna is designed to be held by hand and moved

around each surface if the EUT to measure magnetic radiation. Connect the

antenna via a cable to a receiver with either a 50-ohm input or high

impedance (10 K ohm or greater) input. Calibrations for both inputs are

provided.

CURRENT PROBES

BCP-610 LF Current Probe 20 Hz - 20 MHz

BCP-611 HF/VHF Current Probe 10 kHz - 150 MHz

The current probes come ready for use.

Operation: The two current probes measure conducted emissions when

clamped around a single conductor, cable or a bundle of conductors.

Disconnect the probe latch Position the probe around the conductor and

close the probe. Reconnect the probe latch to ensure that the probe is tightly

closed. Connect the probe connector to the receiver with a cable. The probe

calibrations supplied are into a 50-ohm receiver.

TRIPOD AND MOUNTING ADPTERS

ATU-510 Tripod

AEH-510 Azimuth and Elevation Head

The azimuth and elevation head (AEH-510) mounts to the tripod (ATU-510)

top and allows the antennas to be rotated 360 degrees and tilted between

horizontal and vertical polarization. The tripod and azimuth and elevation

head come in their own carrying case. Each tripod leg is independently

adjustable in angle and length to facilitate antenna height setting. The tripod

legs have a rubber tip on one end for indoor or hard surface use, and a metal

spike on the other end for outdoor soft surface (such as dirt) use.

TRANSIT STORAGE CASES

TCC-511 Tripod Carrying Case

TSC-542 Transit Storage Case

The antenna carrying case (TSC-542) prevents damage and loss of

antennas when storing or transporting the antenna kit. The case is

constructed of lightweight and durable polyethylene. Two case keys are

provided with the case.