- ページ 9

洗濯機 Dexter Laundry T-900のPDF インストレーション＆オペレーションマニュアルをオンラインで閲覧またはダウンロードできます。Dexter Laundry T-900 18 ページ。 80lb capacity computer control opl washer

PROGRAMMING INSTRUCTIONS:

Programming can be accomplished manually using the machine controls or by connecting to the

machine control using a PDA (personal digital assistant). For instructions on using a PDA with

this washer control, please contact your local Dexter distributor. Please read below for manual

programming instructions.

The keypad layout for the washer control is shown above.

WASH CYCLE PROGRAMMING:

Turn on the power to the washer.

Turn the Run/Program key to the Program position. Display will show "C O" and the "ADD

BLEACH" light will blink and will continue to blink during the programming mode.

Press the "DOWN" or "UP" buttons to select which cycle to alter. When the desired cycle

number is displayed, press "START".

The display should now show a "b". The "b" and the cycle indicator lights indicate which

bath is being selected to alter. Press the "UP" and "DOWN" buttons to select a bath to

change and then press "START". The indicator lights are shown below.

PRE

FLUSH

WASH

When "RINSE" is selected, "b r1" through "b r4" may be selected. There may be multiple

rinses that are indicated by r1, r2, r3 and r4.

Each bath can be programmed with the following options. Use the "DOWN" and "UP" keys

to select the desired setting and the "START" key to move to the next option.

WASH

RINSE

FINAL

SPIN

RINSE