- ページ 6

アンテナ A.H. Systems SAS-543のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。A.H. Systems SAS-543 13 ページ。 Biconical antenna

A.H. Systems SAS-543 High Power Biconical Antenna

OPERATING INSTRUCTIONS

The SAS-543 Biconical Antenna is shipped with the elements detached from

the balun.

The SAS-543 biconical antenna has two 1/4-20 mounting holes on the base of

the balun. Attach the antenna to the azimuth and elevation head (AEH-510)

through the screw hole in the antenna base. The azimuth and elevation head

(AEH-510) mounts to the tripod (ATU-510) top and allows the antennas to be

rotated 360 degrees and tilted between horizontal and vertical polarization.

Each tripod leg is independently adjustable in angle and length to facilitate

antenna height setting. The tripod legs have a rubber tip on one end for indoor

or hard surface use, and a metal spike on the other end for outdoor soft surface

(such as dirt) use.

Mount the antenna such that the elements are parallel to the ground for

horizontal polarization testing, or perpendicular to the ground for vertical testing.

The horizontal beamwidth of the biconical antenna is approximately 60 degrees

and it should be pointed or aimed in the direction that the received signal is

coming from.

 A.H. Systems inc. – May 2014

REV C