- ページ 4

リフティングシステム Aqua Creek Products F-12PPL-HD-AT1-05のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Aqua Creek Products F-12PPL-HD-AT1-05 14 ページ。 Portable lift

NOTE:

Assembly will require twelve (12) 50lb bags (600lbs) of sand, not supplied with the lift.

DO NOT USE LIFT WITHOUT SAND AS A COUNTERWEIGHT!

1. Remove the assembled lift from the packaging and move to the pool side.

2. Situate the lift by the pool edge (refer to FIGURE 1, page 3)

and lock the casters. Set brake by turning the brake knob

clockwise until the brake foot comes into contact with the

pool deck. NOTE: Brake is located on the front corner of the

lift, behind the seat.

3. Attach the seat belt through the loops in the seat base and

pinch the hook & loop material together. See diagram to

right.

4. Place the battery on the charger and bring to a full charge.

5. Apply dielectric grease on the metal tabs of the battery and

the control box on the lift.

6. Mount the battery onto the control box on the

lift and snap the battery into place. Listen for

a 'click' when the battery is installed properly.

There should be no gap between the battery and

control box. See FIGURE 2 to the right. NOTE: To

extend battery life, always store battery on the

charger when the lift is not in service.

Patriot-AT1 Assembly Instructions

LOOP ON TOP

FOR EASY ACCESS

THREAD THROUGH

SLOTS AND PINCH

TOGETHER TO HOLD

BATTERY

CONTROL BOX

FIGURE 2

Revised 6/18/19